A suspended vase is simple to construct yet looks lovely and adds just enough colour to brighten up the room. Here are the simple steps to make one:

1) Use a piece of plywood (approximately 350mm x 300mm x 25mm) and roughly paint white for a worn-in feel.

2) Find a small vase or jar that has a lip at the top. Position it on the wood and drill two holes on either side at the base of the opening.

3) Wrap steel wire around the lip of the jar a few times and twist it once until it’s secure. Position the jar so that it’s lined up on the wood and poke the ends through the small holes that you drilled. Wrap them together in the back and clip any extra wire.

4) Drill two additional holes at the top of the wood and wrap a second piece of steel wire through leaving a large loop at the top. Twist the ends around the base and clip off the extra wire.

5) Add water, flowers and hang!

Tweet This | Share on Facebook

Add Comment

You need to be logged in to add comments.

Number of comments: 0

View Comments

There are currently no comments on this article.